POWER FIX
STONE MASTIC

Power Fix is a high performance rapid curing, styrene free, low odour, 2 component chemical injection anchoring system based on a modified polyester resin in methacrylate monomers. The co-axial cartridge format comprises a resin and hardening agent in separate internal compartments which are mixed to the correct proportions in the delivery nozzle when triggered using the required applicator gun.


WHERE IS IT USED:

Power Fix is primarily designed for general use medium duty bonding of anchor studs, bolts, threaded bars, sockets, sleeves, wall ties and masonry fixings into clay and concrete brickwork, block work, aerated block, stone and solud concrete. Ideally suited for use in hollow masonry and perforated brickwork when used in conjunction with metal and nylong sleeves.
 
 

CHARACTERISTICS:
High load values in concrete and
masonry for medium duty applications.
Non hazardous, environmentally
friendly, low odour.
Imparts no expansion stresses in the
base material.
Suitable for fixings with small edge
distance.
Rapid cure.
Vibration resistant.
Useable in damp and wet
environments.
Chemical resistant.
Non flammable
Corrosion resistant

Product Code Description size Size
ANC456 Power Fix cartridge 380ml 380 ml
ANC457 Power Fix heavy duty applicator gun 1:1r 1:1r
ANC458 Power Fix site kit * -
ANC459 Power Fix spare mixer nozzle 220mm
 

FORMAT:

Supplied in a 380ml co-axial 10:1 ratio cartridge with a replaceable protective cap and 1 nr mixer nozzle, for use with Power fix applicator gun and accessories only. 10nr per case. Colour when mixed - grey.
 
 
Installation
IN CONCRETE AND SOLID MASONRY:
Drill hole to correct diameter and depth, diamond cored drill holes should be roughened prior to injection.
Clean Drill hole thoroughly using wire brush and remove all dust using a blowout pump, or airline.
Discard the first 100mm of resin or until the mix is an even colour.
Inject from the base of the drill hole withdrawing as the hole fills until 1/3 to 1/2 full
(dependant on application)
Insert clean fixing with a rotating motion until resin can be seen at the mouth of the hole. Remove any excess material immediately.
Remove cap and attach mixer nozzle onto cartridge and insert in applicator gun.
Leave undisturbed until cured and then attach fixture and torque to required setting.
 
IN HOLLOW MASONRY:
Carry out steps 1 - 2 as above & then:
Insert nylon or metal sleeve as appropriate
 Inject from the base of the drill hole withdrawing until the sleeve is completely full.
Insert fixing carefully with a rotating motion.
Leave undistributed until cured and then attach fixture.
 

--------------------------------------------
FIXED CAVITY SYSTEMS
--------------------------------------------
ADJUSTABLE CAVITY SYSTEMS
--------------------------------------------
VARIABLE OVERHEAD CAVITY SYSTEMS
--------------------------------------------
LIGHT DUTY FIXED CAVITY SYSTEMSS
--------------------------------------------
CHANNEL SYSTEMS
--------------------------------------------
FASTENING SYSTEMS
--------------------------------------------
STONE MASTIC
POWER FIX
MASTICI MARMOLIT
--------------------------------------------
ACCESSORIES
--------------------------------------------
GRADES OF STEEL
--------------------------------------------